Handmade Jewellery - Comparison of Jewellery Made By Hand With Casting Method

Before crafting handmade jewellery two things, casting and making of jewellery by hand, must be understood. This will help you to decide whether making of jewellery by hand is worse or better, than casting.
The handcrafted jewellery is designed by hammering, bending, twisting and soldering the metal in desired form. For instance, while making a plain gold wedding ring the jeweller will start off by having a lump of gold metal in an undefined shape and will melt it down. Then he will pour the melted gold into a steel container which will harden the liquid for giving desired shape. The liquid will be turned into a thick bar. Then jeweller will roll the piece up to a time that he will finally get a long flat piece. After that he will cut down the pieces in a length that can be easily fit in customer’s finger. In the next stage he will hammer the piece to give a shape of ring and will join the both corners to create a ring. After that, he will give it a nice circular shape and polish it. Then recommended gems or crystals will be fitted into the ring. Now the gold wedding handmade ring is ready. This whole process might take one hour or little more. The whole process will start again as mentioned, if another ring is required to be made.
So the hand made jewellery piece will take hours or may be days to craft while casting it will take minutes for casting numerous identical pieces. In hand made jewellery the labor cost is a main factor. On casting, only the cleaning is required and nothing else and short time is spent in casting method.
For casting, in the jewellery trade the Lost Wax casting method is used as main method of casting. In this method, a master piece is prepared first and this master piece can be used to make unlimited copies of the jewellery item. In casting method large number of rings are made at one time but in hand made method only one piece is made at one time. So it can be said that the piece of handmade jewellery is stronger and heavier because of the techniques used like hammering and filling which make the piece hard and qualitative.
In casting sometimes the bubbles remains inside and missed by the manufacturer, which make it a less quality product and less durable. Nowadays this kind of problem can be easily controlled by highly sophisticated equipments but it could happen. The casting method can also be said a duplicating method by which a manufacturer copies number of rings of a piece.
So comparing both methods, the hand made piece of jewellery can be a unique thing and an expensive one. Casting method is cheaper and many people can enjoy the same product. Handmade jewellery is long lasting, durable and harder as compared to jewellery made with the casting method.

For More Information and Articles on Jewellery:
Please visit this site for full information about Jewellery and its different types and designs. For example Gold Jewellery, Silver Jewellery, Engagement Rings etc:
http://www.myjewelersplace.com/